#Am i connected to wifi or ethernet how to#

Homeplug adapters can be used to extend both a wired and wireless network.

They work by using the home electrical wiring to carry the Ethernet signal between rooms. Homeplug adaptors are the more flexible option than straight wiring as they can easily add network connectivity to any room that has a power outlet.

#Am i connected to wifi or ethernet how to#

See How to Wire your Home Network Using Homeplug Adapters It does however provide the fastest and most reliable connection. However you will need to run the cable between rooms which usually involves drilling holes etc.ДЄlthough this is a very low cost method it is usually not the easiest. You should note that the maximum cable distance between network devices is 100m. You can purchase UTP connection cables of various lengths which means that you donвЂ™t need to create your own cables. General Considerations Using an Ethernet UTP Cable This is illustrated in the main network diagram above. You use a port on the Home router to connect to the remote switch using either: To extend a wired network you will need an Ethernet Switch. The repeater creates a second Wireless network which usually has a different SSID than the original network.Д«ecause wireless devices on network 2 must go through two wireless hops this connection method is much slower than using an Ethernet extension cable or homeplug adaptors. they could use the 5Ghz band for the connection to the WAP and the 2.5 Ghz band for connecting devices. However some repeaters using different bands i.e. It also usually means that the throughput is halved. This means that the repeater must be in range of the original Wireless signal. Note You will hear the terms repeater,range extender and booster used but they are generally describing the same thing.ДЄ Wireless Repeater takes a wireless signal and then re-broadcasts it.

It is also the slowest and the most error prone method method. This is probably the quickest and easiest method and according to a recent survey used by over 20% ot US households. Using a Wireless Repeater or Range Extender

Connect with Wi-FI using a Wi-Fi range extender or repeater.

Use a WAP connected to the hub on network 1 using Homeplug adapters.

Use a WAP connected to the hub on network 1 using a UTP Ethernet cable.

There are three methods available for connecting the Wireless Access Points ( WAPs) together. To extend the Wi-Fi coverage to area 2 we will need a second WAP (Wireless access point), and this second access point will need to connect to the WAP in Area 1. If we assume that the present WAP (Wireless Access Point) covers area 1 but not area 2 and our task is to extend the Wi-Fi network to cover area 2. This basic configuration can be extended to provide both wired and Wireless access using a variety of methods and illustrated in the network diagram below:Д«efore you go to the trouble of extending a network it is a good idea to try an get a better signal by relocating the router/Wireless access point if possible. The home router is the hub of the network as it connects your home network to the Internet. If we start with a basic home network consisting of a single Wireless access point (WAP) that is part of the Wireless router as described in building a home network. Most people want to access the Internet from any room in the house/office and maybe even in the garden or summer house.ДЄlthough most people will want extended Wireless (Wi-Fi) access we will also look at how to extend both wired access and wireless access.